Super Purchasing for Aluminum Formwork For Column - Aluminium formwork – Zhongming

Introduction：

Aluminum formwork is getting more popular because of its light weight and good strength. It requires fewer supports and ties. Aluminum formwork system components include the walls, columns, beams, plates,templates and panel frames. Dedicated pin buckles are used to connect the templates.

The template system can be dismantled at an early stage. Standard specification size of the wall template is 100mm-450mm X 1800mm-2400mm.

Standard specification size of the roof template is 600mm X 600mm-1200mm with standard average weight of 23 kg/m

Specification

1.material：All aluminum formwork materials made of aluminum alloy

2.lateral pressure:30-40 KN/m2.

3.weight：25kg/m2.

4.reused:more than 300 times

Feature：

1.Easy to work

It is about 23-25kg/m2, light weight means only a single worker could move the Aluminum Formwork easily.

2.Efficient

The Aluminum Formwork System is jointed by the pin, it is two times fast than wood formwork to install and dismantle, so it could save more work and work time.

3.Saving

The Aluminum Formwork System supports early-dismantling application, the construction working cycle is 4-5 days per floor, it is effective for cost saving in human resource and construction management.

The Aluminum Formwork can be re-used more than 300 times, the economic cost is very low of every time using.

4.Safety

The Aluminum Formwork system adopts the integrative design, it could load 30-40KN/ m2, which could reduce the safety loophole leaded by the construction and materials.

5.High quality of construction.

The aluminum formwork is made by extrusion process, Legitimate design fine processing with very accurate measurements. The joints are tight, with a smooth concrete surface.No need heavy backing plaster, effectively for plaster cost saving.

6.Environment friendly

The aluminum material of the formwork could also be recovered after project finishing, it avoids the waste.

7.Clean

Different with the wood formwork, there is no wood panel,fragment and other waste in the construction area using the aluminum formwork.

8.Widely scope of application:

The Aluminum Formwork System is suited for application of walls, beams, floors, windows, columns, etc.