We help the world growing since 1998

Column Plastic Formwork System

Column Plastic Formwork System

The choice of efficient formwork solution is a significant decision for saving both time and costs during the construction process. column plastic formwork products improve profitability on the construction site primarily with their suitability for fast mounting and demounting process that saves time and makes the workflow significantly more efficient. For this reason, our solutions can be used for buildings, roads, infrastructure projects, bunkers, swimming pools, or to build an entire prefabricated house.The following are the advantages of plastic column formwork




easy set up

Different size of panels can be firmly locked by simply turn the special handles to 90 degree. The panels have rib on the back, which makes the system need not traditional wood blocks and nails.The panels have holes to fit tie rod, guarantee the strength of the whole system.


The biggest panel is 120x60cm, weight only 10.5kg, which can be lift and set up by only one person easily, need no crane on the site.make the transport and on-site manipulation easier, especially in comparison with traditional formworks made of aluminum or wood. Lightness also contributes to  high-level worksite safety.


enviroment friendly

Plastic formwork system need not cut and nail due to the variety size,and nearly need no wood, the material can be recycled after broken, will not pollute the enviroment. In practice using, the corner of panels is easier broken relatively compared with the panel itself, our modular formwork have 4 small corner pieces to be replaced seperately,makes the panels can be reused about 100 times.


The material of modular formwork is PP (polypropylene) mixied with special glass fibres which enable panels to hold high pressures.
The handles are made by high strength Nilon, each panel locked by at least 4 handls, which makes the whole system strong enough to pour 40cm walls.


walls and corners

Using modular formwork, it is possible to pour up to 40cm thick and 3 meters highstraight walls one time.
Combining with special corners and compensation panels, right angle walls, three way T-walls and four way cross walls can be fomed easily.
The low weight and modularity of modular formwork makes it ideal for fence walls as it is possible to move large gangforms by hand.

basins and elevator shafts

The low weight of plastic modular formwork simplifies the pouring of tanks, basins and swimming pools in areas with limited or no access to heavy equipment.
Modular fomwork also ideal for elevator shafts as it can use without aid of crane, can make an easy, fast and precise job by hand.


doors and windows

To make doors and windows by modular formwork is simple, by inserting inside the formwork a wooden frame corresponding to the size of the opening needed, and then pour the walls with doors and windows.



Column panel is a modular shuttering panel, made of high impact resistant PP plastic, for reinforced concrete columns, pile caps and walls. The panels are engineered to interconnect or thogonally in different positions, creating a “star”-shaped formwork of variable size.

The column panels are interconnected using the standard nylon locking handles. Each panel will require 9 handles.
The forming face has 6 parallel rows of fixing holes to allow the orthogonal connection of the panels in a “star” shape. The rows are placed at a distance of 100/50mm the one from the other, allowing the forming of square and/or rectangular columns with side of 150 to 600mm

There is a series of holes in the middle of the panels for the passage of tie rods. The position of the holes is asymmetric to avoid conflict between crossing tie rods.
All unused holes are closed with plugs.

A column 3m height is formed with 16x column panels,8 x tie rods, 16 x washers, 144 x handles, 4 vertical steel reinforcement bars.


corner wall configuration


T wall configuration