The ringlock scaffolding is a new type of scaffolding system. The ringlock scaffolding is also called disc lock scaffolding, rosette ringlock scaffolding and layher scaffolding, etc. It has been widely used in construction projects such as viaducts, tunnels, factories, etc., and can also be used as a lighting stand, background stand, etc. on the stage of a concert.
How to build ringlock scaffolding
The construction method of the ringlock scaffolding is simple and convenient. This is also the reason why it is widely used in civil construction and other projects. When installing the ringlock scaffold, you only need to align the horizontal ledger connector to the position of the rosette plate, and then insert the pin into the rosette plate hole by hand Pass through the bottom of the joint, and then hit the top of the plug with a hammer to make the arc surface on the horizontal ledger joint and the vertical tube tightly combined.
There are several requirements to pay attention to when installing ringlock scaffolding:
1. Before installation, first check whether it is in good condition and prepare the accessories that need to be installed.
2. After the rosette-ringlock scaffolding accessories are ready, you only need to align the horizontal ledger connector to the position of the rosette plate during installation, and then insert the pin into the rosette plate hole by hand and pass through the bottom of the joint.
3. Next, hit the top of the plug with a hammer to make the arc surface on the horizontal ledger joint and the vertical tube tightly combined.
4. When installing the base, shake the scaffold with water to see if it is firm.
The above is the relevant knowledge for you about how to build and install the ringlock scaffolding. I hope it will be helpful for you to understand and use the ringlock scaffold.
Post time: Apr-20-2021